SFT-EZS1 Flame Detector Tester Catalog
SFT-EZS1 flame detector tester is suitable for the diagnosis of some functions of the EZS-IR and EZS-UV flame scanner.
The tester provides a light source signal that simulates the emission of infrared or ultraviolet light from a flame as a signal input to the flame scanner.
The panel of the tester is equipped with two ammeters and one voltmeter, which are used to detect the current value of the±12V power supply input from the flame scanner and the voltage value of the flame signal strength output by the flame scanner. The tester is integrated into an industrial-grade carrying case, which is easy to carry and also contributes to the protection of the tester.
Product Features
• Portable Design, Convenient to Use
• Simple Interface, Easy to Operate
• Rapid Diagnosis With Immediate Results
Specifications
|
P/N |
Input Power |
Operating Temp. |
Suitable For |
Weight |
|
60-380-0008 |
100-240Vac, 50/60Hz |
0℃ to +70℃ |
EZS-IR、EZS-UV |
4.35 kg |
Operating Function
|
NO. |
Component |
Function |
|
1 |
IR Indicator |
IR LED emit light when this indicator is on |
|
2 |
Toggle Switch |
IR and UV light source control switch, upward toggle, IR indicator on, emit IR LED light, downward toggle, UV indicator on, emit UV LED light, put in the middle, IR and UV indicators off, IR and UV LED are not emitting light |
|
3 |
UV Indicator |
UV LED emit light when this indicator is on |
|
4 |
Placement Slot |
Placement of the flame scanner to be tested |
|
5 |
IR and UV LEDs |
Emits infrared and ultraviolet LED light |
|
6 |
Communication Cable |
Connect the flame scanner to tester |
|
7 |
Power Cord |
Power cable of the tester |
|
8 |
-12V Ammeter |
Indicates the current value of the flame scanner under test when a -12V power supply is input. |
|
9 |
-12V Indicator |
Indicates that the voltage of the -12V power supply output by the tester is normal. |
|
10 |
+12V Ammeter |
Indicates the current value of the flame scanner under test when a +12V power supply is input. |
|
11 |
+12V Indicator |
Indicates that the voltage of the +12V power supply output by the tester is normal. |
|
12 |
Power Switch |
The tester power switch with indicator light to control the tester power on or off. |
|
13 |
Flame Signal Strength Voltmeter |
The tester power switch with indicator light to control the tester power on or off. |
|
14 |
FLAME ON Indicator |
Indicates that the flame signal strength voltage output from the flame scanner under test is greater than the “flame on" threshold set by the tester. Indicates that the flame scanner under test is capable of observing the flame. |
|
15 |
FLAME OFF Indicator |
Indicates that the flame signal strength voltage output from the flame scanner under test is less than the “flame off" threshold set by the tester. Indicates that the flame scanner under test cannot observe a flame. |
|
16 |
Power Socket |
Tester input power socket, permitted power 220Vac, 50Hz |
Contact
Room 703, Building 2, 525 Yuanjiang Road, Minhang District, Shanghai
021-64425576
info@safe-fire.com.cn
www.safe-fire.com.cn
Follow us